GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 20730.2-2019 |
Instruments with analogue inputs and two-or multi-state outputs for use in Industrial-process control systems—Part 2:Guidance for inspection and routine testing 工业过程控制系统用模拟输入两位或多位输出仪表 第2部分:检查和例行试验导则 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.14-2018 |
Industrial-process control valves—Part 8-2: Noise considerations—Laboratory measurement of noise generated by hydrodynamic flow through control valves 工业过程控制阀 第8-2部分:噪声的考虑 实验室内测量液动流流经控制阀产生的噪声 |
China National Standards Industrial-process c |
English PDF |
GB/T 17614.3-2018 |
Transmitters for use in Industrial-process control systems—Part 3: Methods for performance evaluation of intelligent transmitters 工业过程控制系统用变送器 第3部分:智能变送器性能评定方法 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.2-2017 |
Industrial-process control valves—Part 2-1: Flow capacity—Sizing equations for fluid flow under installed conditions 工业过程控制阀 第2-1部分:流通能力 安装条件下流体流量的计算公式 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.7-2017 |
Industrial-process control valves—Part 7: Control valve data sheet 工业过程控制阀 第7部分:控制阀数据单 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.15-2017 |
Industrial-process control valves—Part 8-3: Noise considerations—Control valve aerodynamic noise prediction method 工业过程控制阀 第8-3部分:噪声的考虑 空气动力流流经控制阀产生的噪声预测方法 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.8-2015 |
Industrial-process control valves—Part 8-1: Noise considerations—Laboratory measurement of noise generated by aerodynamic flow through control valves 工业过程控制阀 第8-1部分:噪声的考虑 实验室内测量空气动力流流经控制阀产生的噪声 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.4-2015 |
Industrial-process control valves—Part 4: Inspection and routine testing 工业过程控制阀 第4部分:检验和例行试验 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.18-2015 |
Industrial-process control valves—Part 9: Test procedure for response measurements from step inputs 工业过程控制阀 第9部分: 阶跃输入响应测量的试验程序 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.16-2015 |
Industrial-process control valves—Part 8-4: Noise considerations—Prediction of noise generated by hydrodynamic flow 工业过程控制阀 第8-4部分:噪声的考虑 液动流流经控制阀产生的噪声预测方法 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.1-2015 |
Industrial-process control valves—Part 1: Control valve terminology and general considerations 工业过程控制阀 第1部分:控制阀术语和总则 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.10-2015 |
Industrial-process control valves—Part 2-4: Flow capacity—Inherent flow characteristics and rangeability 工业过程控制阀 第2-4部分:流通能力 固有流量特性和可调比 |
China National Standards Industrial-process c |
English PDF |
GB/T 20819.2-2015 |
Controllers with analogue signals for use in Industrial-process control systems—Part 2: Guidance for inspection and routine testing 工业过程控制系统用模拟信号调节器 第2部分:检查和例行试验导则 |
China National Standards Industrial-process c |
English PDF |
GB/T 20819.1-2015 |
Controllers with analogue signals for use in Industrial-process control system—Part 1: Methods of evaluating the performance 工业过程控制系统用模拟信号调节器 第1部分:性能评定方法 |
China National Standards Industrial-process c |
English PDF |
GB/T 17614.2-2015 |
Transmitters for use in Industrial-process control systems—Part 2: Methods for inspection and roution testing 工业过程控制系统用变送器 第2部分:检查和例行试验方法 |
China National Standards Industrial-process c |
English PDF |
GB/T 17614.1-2015 |
Transmitters for use in Industrial-process control systems—Part 1: Methods for performance evaluation 工业过程控制系统用变送器 第1部分:性能评定方法 |
China National Standards Industrial-process c |
English PDF |
GB 29812-2013 |
Industrial-process contro l- Safety of analyser houses 工业过程控制 分析小屋的安全 |
China National Standards Industrial-process c |
English PDF |
GB/T 17614.3-2013 |
Transmitters for use in Industrial-process control systems - Part 3: Methods for performance evaluation of intelligent transmitters 工业过程控制系统用变送器 第3部分:智能变送器性能评定方法 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.17-2010 |
Industrial-process control valves - Part 2-5: Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery 工业过程控制阀 第2-5部分:流通能力 流体流经级间恢复多级控制阀的计算公式 |
China National Standards Industrial-process c |
English PDF |
GB/T 17614.2-2008 |
Transmitters for use Industrial-process control systems - Part 2: Methods for inspection and routine testing 工业过程控制系统用变送器 第2部分: 检查和例行试验方法 |
China National Standards Industrial-process c |
English PDF |
GB/T 22137.2-2008 |
Valve positiongers for use in Industrial-process control system - Part 2: Methods of evaluating the performance of intelligent value positiongers with pneumatic outputs 工业过程控制系统用阀门定位器 第2部分:气动输出智能阀门定位器性能评定方法 |
China National Standards Industrial-process c |
English PDF |
GB/T 22137.1-2008 |
Valve positiongers for use in Industrial-process control system - Part 1: Methods of evaluating the performance of valve positiongers with pneumatic outputs 工业过程控制系统用阀门定位器 第1部分:气动输出阀门定位器性能评定方法 |
China National Standards Industrial-process c |
English PDF |
GB/T 22136-2008 |
Industrial-process control system - Classification of adaptive controllers for the purpose of evaluation 工业过程控制系统 评估用自适应控制器分类 |
China National Standards Industrial-process c |
English PDF |
GB/T 17614.1-2008 |
Transmitters for use in Industrial-process control systems - Part 1: Methods of evaluating the performance 工业过程控制系统用变送器 第1部分: 性能评定方法 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.5-2008 |
Industrial-process control valves - Part 5: Marking 工业过程控制阀 第5部分: 标志 |
China National Standards Industrial-process c |
English PDF |
GB/T 3386.2-2007 |
Electrical and pneumatic analogue chart recorders for use in Industrial-process control systems - Part 2: Guidance for inspection and routine testing 工业过程控制系统用电动和气动模拟图纸记录仪 第2部分:检查和例行试验导则 |
China National Standards Industrial-process c |
English PDF |
GB/T 3386.1-2007 |
Electrical and pneumatic analogue chart recorders for use in Industrial-process control systems - Part 1: Methods for performance evaluation 工业过程控制系统用电动和气动模拟图纸记录仪 第1部分:性能评定方法 |
China National Standards Industrial-process c |
English PDF |
GB/T 20819.2-2007 |
Controllers with analogue signals for use Industrial-process control system - Part 2: Guidance for inspection and routine testing 工业过程控制系统用模拟信号控制器 第2部分:检查和例行试验导则 |
China National Standards Industrial-process c |
English PDF |
GB/T 20819.1-2007 |
Controllers with analogue signals for use Industrial-process control system - Part 1: Methods of evaluating the performance 工业过程控制系统用模拟信号控制器 第1部分:性能评定方法 |
China National Standards Industrial-process c |
English PDF |
GB/T 20730.1-2006 |
Industrial-process control systems -Instruments with analogue inputs and two- or multi-state outputs - Part 1: Methods of evaluating performance 工业过程控制系统用模拟输入两位或多位输出仪表 第1部分:性能评定方法 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.9-2005 |
Industrial-process control valves Part 2-3:Flow capacity-Test procedures 工业过程控制阀 第2-3部分:流通能力 试验程序 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.6-2005 |
Industrial-process control valves Part 6-1:Mounting details for attachment of Positioners to control valves-Positioner mounting on linear actuators 工业过程控制阀 第6-1部分:定位器与控制阀执行机构 连接的安装细节 定位器在直行程执行机构上的安装 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.4-2005 |
Industrial-process control valves Part 4:Inspection and routine testing 工业过程控制阀 第4部分:检验和例行试验 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.3-2005 |
Industrial-process control valves Part 3-1:Dimensions-Face-to-face dimensions for flanged,two-way,globe-type,straight pattern and center-to-face dimensions for flanged,two-way,globe-type,angle pattern control valves 工业过程控制阀 第3-1部分:尺寸 两通球形直通 控制阀法兰端面距和两通球形角形 控制阀法兰中心至法兰端面的间距 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.2-2005 |
Industrial-process control valves Part 2-1:Flow capacity Sizing equations for fluid flow under Installed conditions 工业过程控制阀 第2-1部分:流通能力 安装条件下流体流量的计算公式 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.16-2005 |
Industrial-process control valves Part 8-4:Noise considerations-Prediction of noise generated by hydrodynamic flow 工业过程控制阀 第8-4部分:噪声的考虑 液动流流经控制阀产生的噪声预测方法 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.15-2005 |
Industrial-process control valves Part 8-3:Noise considerations-Control valve aerodynamic noise prediction method 工业过程控制阀 第8-3部分:噪声的考虑 空气动力流流经控制阀产生的噪声预测方法 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.14-2005 |
Industrial-process control valves Part 8-2:Noise considerations-Laboratory of noise generated by hydrodynamic flow through control valves 工业过程控制阀 第8-2部分:噪声的考虑 实验室 内测量液动流流经控制阀产生的噪声 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.13-2005 |
Industrial-process control valves Part 6-2:Mounting details for attachment of Positioners to control valves-Positioner mounting on rotary actuators 工业过程控制阀 第6-2部分:定位器与控制阀执行机构连接的安装细节定位器在角行程执行机构上的安装 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.12-2005 |
Industrial-process control valves Part 3-3:Dimensions-End-to-end dimensions for buttweld,two-way,globe-type,straight pattern control valves 工业过程控制阀 第3-3部分:尺寸 对焊式两通球形直通控制阀的端距 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.11-2005 |
Industrial-process control valves Part 3-2:Dimensions-Face-to-face dimensions for rotary control valves except butterfly valves 工业过程控制阀 第3-2部分:尺寸 角行程控制阀(蝶阀除外)的端面距 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.10-2005 |
Industrial-process control valves Part 2:Flow capacity Section Four:Inherent flow characteristics and rangeability 工业过程控制阀 第2-4部分:流通能力 固有流量特性和可调比 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.8-1998 |
Industrial-process control valves--Part 8:Noise considerations--Section 1:Laboratory measurement of noise generated by aerodynamic flow through control valves 工业过程控制阀 第8部分:噪声的考虑 第1节:实验室内测量空气动力流流经控制阀产生的噪声 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.7-1998 |
Industrial-process control valves--Part 7:Control valve data sheet 工业过程控制阀 第7部分:控制阀数据单 |
China National Standards Industrial-process c |
English PDF |
GB/T 17213.1-1998 |
Industrial-process control valves--Part 1:Control valve terminology and general considerations 工业过程控制阀 第1部分:控制阀术语和总则 |
China National Standards Industrial-process c |
English PDF |
Find out:45Items | To Page of: First -Previous-Next -Last | 1 |